King Innovation specializes in the development, design, and manufacture of innovative products to meet the needs of their customers. The company has evolved considerably throughout the years, but the goal has always remained the same: innovation.Today, the business operates as King Innovation and continues its commitment to the continual pursuit of excellence in producing innovative products. One of King’s greatest successes was the development of the DryConn Waterproof Connectors. This patented product line transformed the irrigation and electric industry by allowing installers to splice and seal conductors in one easy step. The connector has won twelve national awards for product excellence.
- UL Listed 600V for dry, wet or above/below grade applications when used in an enclosure
- For use in Direct Bury applications when operating at 30V or less
- Pre-filled with dielectric silicone sealant that never hardens
- Waterproof and corrosion proof
- Easy latch lid provides strain relief
- One piece for easy installation
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- Designed for tracer splices and cathodic applications
- Max. Voltage: 600V
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #6
- Silicone Sealant: -45 deg F to 400 deg F
- UL Designation: MSR
- UL 486D listed for waterproof and direct bury
- Maximum 600-Volt
- UV resistant for above ground applications
- Pre-filled with a dielectric silicone sealant that never hardens
- For use in pole lighting, high corrosion areas, traffic control loops, underpass lighting, outdoor facility lighting
- UL 486D listed, 600V rated
- Waterproof and corrosion proof
- 1 -step installation with no twisting required
- Pre-filled with a non-toxic SmartGel
- Lug style wire connector for a secure splice
- Waterproof and corrosion proof
- For use in outdoor or direct burial locations
- Making tap or branch splices on insulated cables rated up to 100 Volt
- Waterproof and corrosion proof
- SmartGel is a non-toxic formula which eliminates haz-mat requirements
- Locking mechanism centers splice in box
- UL Listed 600V for dry, wet or above/below grade applications when used in an enclosure
- For use in Direct Bury applications when operating at 30V or less
- Pre-filled with dielectric silicone sealant that never hardens
- Waterproof and corrosion proof
- Easy latch lid provides strain relief
- One piece for easy installation
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- Designed for tracer splices and cathodic applications
- Max. Voltage: 600V
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #6
- Silicone Sealant: -45 deg F to 400 deg F
- UL Designation: MSR
- UL Listed 600V for dry, wet or above/below grade applications when used in an enclosure
- For use in Direct Bury applications when operating at 30V or less
- Pre-filled with dielectric silicone sealant that never hardens
- Waterproof and corrosion proof
- Easy latch lid provides strain relief
- One piece for easy installation
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- Designed for tracer splices and cathodic applications
- Max. Voltage: 600V
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #6
- Silicone Sealant: -45 deg F to 400 deg F
- UL Designation: MSR
- UL Listed 600V for dry, wet or above/below grade applications when used in an enclosure
- For use in Direct Bury applications when operating at 30V or less
- Pre-filled with dielectric silicone sealant that never hardens
- Waterproof and corrosion proof
- Easy latch lid provides strain relief
- One piece for easy installation
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- Designed for tracer splices and cathodic applications
- Max. Voltage: 600V
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #6
- Silicone Sealant: -45 deg F to 400 deg F
- UL Designation: MSR
- UL Listed 600V for dry, wet or above/below grade applications when used in an enclosure
- For use in Direct Bury applications when operating at 30V or less
- Pre-filled with dielectric silicone sealant that never hardens
- Waterproof and corrosion proof
- Easy latch lid provides strain relief
- One piece for easy installation
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- Designed for tracer splices and cathodic applications
- Max. Voltage: 600V
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #6
- Silicone Sealant: -45 deg F to 400 deg F
- UL Designation: MSR
- For use in irrigation, landscape lighting and direct bury applications
- Waterproof and corrosion proof
- UL 486D listed, 600V rated
- 1 step installation with no pre- twisting of wires necessary
- For use in irrigation, landscape lighting and direct bury applications
- Waterproof and corrosion proof
- UL 486D listed, 600V rated
- 1 step installation with no pre- twisting of wires necessary
- For use in irrigation, landscape lighting and direct bury applications
- Waterproof and corrosion proof
- UL 486D listed, 600V rated
- 1 step installation with no pre- twisting of wires necessary
- For use in irrigation, landscape lighting and direct bury applications
- Waterproof and corrosion proof
- UL 486D listed, 600V rated
- 1 step installation with no pre- twisting of wires necessary
- UL 486D Listed for waterproof and direct bury
- Maximum 600 Volt
- UV resistant for above ground applications
- Pre-filled with a dielectric silicone sealant that never hardens
- UL Listed and 600V Rated
- Waterproof and corrosion proof
- Patented snap fit lid provides strain relief
- UV and impact resistant
- Max. Voltage: 600V max. building wire (1000V max. signs or luminaries)
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #8
- Temperature Rating: -105 deg C (221 deg F)
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- UL Designation: GT2
- UL Listed and 600V Rated
- Waterproof and corrosion proof
- Patented snap fit lid provides strain relief
- UV and impact resistant
- Max. Voltage: 600V max. building wire (1000V max. signs or luminaries)
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #8
- Temperature Rating: -105 deg C (221 deg F)
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- UL Designation: GT1
- For use in above ground or direct bury applications, low voltage lighting or two-wire decoder systems
- Patent pending snap fit lid provides strain relief
- Pre-filled with silicone that never hardens
- Waterproof and corrosion proof
- UV and impact resistant
- UL 486G listed, 600V rated
- For use in pole lighting, high corrosion areas, traffic control loops, underpass lighting, outdoor facility lighting
- UL 486D listed, 600V rated
- Waterproof and corrosion proof
- 1 -step installation with no twisting required
- For use in pole lighting, high corrosion areas, traffic control loops, underpass lighting, outdoor facility lighting, manufacturing hose down areas
- UL 486D listed, 600V rated
- Waterproof and corrosion proof
- One-step installation with no twisting required
- UL Listed 600V for dry, wet or above/below grade applications when used in an enclosure
- For use in Direct Bury applications when operating at 30V or less
- Temperature Rating: 105degC (221degF)
- Silicone Sealant: -45degF to 400degF
- Designed for tracer splices and cathodic applications