In a lighting system, the ballast /driver regulates the current to the lamps and provides sufficient voltage to start the lamps. Without a ballast to limit its current, a lamp connected directly to a high voltage power source would rapidly and uncontrollably increase its current draw and within a second the lamp would overheat and burn out. At Warehouse-Lighting.com, you can find 1000 watt energy-efficient ballasts for your project, whether it’s residential, commercial or industrial. These high-quality options have all been manufactured with the highest standards for a long-lasting solution. They are affordable, easy to implement, and will last for years.
- Brand: Armacost Lighting
- Output:
- Wattage: 20
- Voltage: 12V DC
- Input:
- 100-120V AC
- Dimmable: Yes
- Smooth, full range, flicker-free dimming
- Compatible with BOTH 120 Volt AC dimmers and lighting controls and low-voltage DC dimmers and controls
- Class 2 power supply features overload protection, automatic shut-off
- Compatible with both forward phase (leading edge, triac, incandescent) and reverse phase (electronic low-voltage, ELV, trailing edge) AC dimmers
- Uses soft start on and fade off technology
- No minimum power load; dimming works equally well whether powering a single 3 watt LED puck light or 20 watts of tape lighting, or a combination of both
- Connect up to 100% of the rated 20 watt maximum load – derating performance is not required
- Listings: ETL
- Warranty: 3 Years
- Brand: Armacost Lighting
- Output:
- Wattage: 60
- Voltage: 12V DC
- Input:
- 100-120V AC
- Dimmable: Yes
- Smooth, full range, flicker-free dimming
- Compatible with BOTH 120 Volt AC dimmers and lighting controls and low-voltage DC dimmers and controls
- Class 2 power supply features overload protection, automatic shut-off
- Compatible with both forward phase (leading edge, triac, incandescent) and reverse phase (electronic low-voltage, ELV, trailing edge) AC dimmers
- Uses soft start on and fade off technology
- No minimum power load; dimming works equally well whether powering a single 3 watt LED puck light or 60 watts of tape lighting, or a combination of both
- Connect up to 100% of the rated 60 watt maximum load – derating performance is not required
- Listings: ETL
- Warranty: 3 Years
- Brand: Armacost Lighting
- Output:
- Wattage: 24
- Voltage: 12V DC
- Input:
- 100-120V AC
- Dimmable: Yes
- Smooth, full range, flicker-free dimming
- Compatible with BOTH 120 Volt AC dimmers and lighting controls and low-voltage DC dimmers and controls
- Class 2 power supply features overload protection, automatic shut-off
- Compatible with both forward phase (leading edge, triac, incandescent) and reverse phase (electronic low-voltage, ELV, trailing edge) AC dimmers
- Uses soft start on and fade off technology
- No minimum power load; dimming works equally well whether powering a single 3 watt LED puck light or 24 watts of tape lighting, or a combination of both
- Connect up to 100% of the rated 24 watt maximum load – derating performance is not required
- Listings: ETL
- Warranty: 3 Years
- Brand: Armacost Lighting
- Output:
- Wattage: 45
- Voltage: 12V DC
- Input:
- 100-120V AC
- Dimmable: Yes
- Smooth, full range, flicker-free dimming
- Compatible with BOTH 120 Volt AC dimmers and lighting controls and low-voltage DC dimmers and controls
- Class 2 power supply features overload protection, automatic shut-off
- Compatible with both forward phase (leading edge, triac, incandescent) and reverse phase (electronic low-voltage, ELV, trailing edge) AC dimmers
- Uses soft start on and fade off technology
- No minimum power load; dimming works equally well whether powering a single 3 watt LED puck light or 45 watts of tape lighting, or a combination of both
- Connect up to 100% of the rated 45 watt maximum load – derating performance is not required
- Listings: ETL
- Warranty: 3 Years
- Brand: Keystone Technologies
- External LED Module Included
- Input Voltage: 120-277Vac
- Minimum Runtime: 90 Min
- Power Factor: ≥0.5
- Max. Current: 0.051A @ 120V
- Max. Output Power: 5 Watt
- Rated Output Current: 400mA-100mA
- Output Voltage: 12~41Vdc
- Brand: Westgate Manufacturing
- External Driver for SCXT Series
- Calculate the total wattage and pick adequate driver(s) as power supply. each driver has 4 ports for 4 separate fixtures.
- Do not exceed the maximum wattage of the driver.
- Power switch on driver can reduce the fixture lumens to 75% or 50%, if desired. Dimming function remains active even in lower lumens.