Programming the lighting in your home or business is essential for saving money on your energy costs. With these sensors and lighting controls from Warehouse-Lighting.com, you can easily program your lights to stay on or off depending on room occupancy. Our selection of sensors gives you plenty of options for creating custom lighting solutions in your space. Whether you want a wall sensor, a ceiling sensor or a motion sensor, our high-quality lighting controls allow you to control the lighting in a space without worrying about a light being left on or unnecessary energy being used. This is a cost-effective and environmentally friendly solution that you can easily incorporate in your own home or business.
- Brand: Enerlites
- Voltage: 120/277VA, 50/60Hz
- Mounting Height: 8-50 feet
- Field of View: 360°
- Adjustable Time Delay: 15 sec - 30 min
- UL/cUL listed
- Operating Temp: 32°F to 131°F (0°C to +50°C)
- Load Requirements:
- Incandescent/Tungsten: 800W @ 120VAC, 50/60Hz
- Fluorescent/Ballast: 800VA @ 120VAC / 1200VA @ 277VAC. 50/60Hz
- Motor: 1/4 HP, 120 VAC
- Brand: WareLight
- Voltage: 120-277V
- Standby Power: 0.6W
- Max Current: 10A
- Max Power: 1200W
- Frequency Band: 443.92Mhz
- RF Range: 30m
- UL listed
- One dimming module can be linked with 4 Ware Sense PIR sensors and 5 Ware Sense manual control dimmers.
- Brand: WareLight Select
- Voltage: 3V
- Standby Current: <1uA
- Battery Life: 10 years
- Frequency Band: 443.92Mhz
- RF Range: 30m
- Includes wall plate
- Battery Not Included: CR2032 Used
- Brand: WareLight
- Voltage: 120-277V
- Photocell lens slips through knockout and is secured with a threaded washer.
- Brand: Morris
- Voltage: 120
- Temp Rate: -40F to 158F
- Tungsten Rating: 1800W
- Ballast Rating: 1100 VA
- Frequesncy: 50-60 Hertz
- UL listed
Clearance Item - All Sales Final
- Relay switching
- Transient surge protection to IEC Level 4
- ESD protection to IEC 1000 4-2 Level 4 to protect against damage
- Green LED locator
- Provides 15A, 120 VAC NEMA 5-15R grounding receptacle for use with a wide variety of lamps and appliances
- Memory maintains ON/OFF status of loads and during minor power fluctuations
- Button for ON/OFF manual control Control up to 99 devices, 50 schedules, 50 activities, 50 scenes, 50 rooms, and 20 residences within the My Leviton app
- For Indoor use only
- Control lights and plug loads from anywhere using the free My Leviton app for iOS and Android, no hub required.
- Amazon Alexa products provide voice control: Alexa, turn on living room lights .
- Works with Google Assistant including Google Home for voice control. Ok Google, turn [Google room name] On
- Works with Nest turn on a light when camera detects motion, an alarm goes off, or when Nest says you are Home or Away
- Integrate with IFTTT for additional third-party functionality
- Simplify control of your home schedule lights and connected loads to turn on/off at specific times or based on sunrise/sunset, easily group your smart devices into rooms, and create scenes to activate multiple lights at once.
Clearance Item - All Sales Final
Features
- White and Light Almond color faces included
- Color Change Kits (DDKIT) available in Black, Gray, Brown, Ivory
- Rated for CFL and LED loads up to 600W
- Rated for incandescent loads up to 1800W
- Multi-location (3-way) switching is achieved using DD0SR-1 Coordinating Remote (no LED indicator) or DD0SR-DLZ Matching Remote (with LED indicator).
- Hot, neutral, load and ground required for installation and traveler for muilti-switch applications optional.
- Control up to 20 residences, 99 devices, 50 rooms, 50 scenes, 50 activities, and 50 schedules per account.
- DW15S-1RZ is an identical product in larger retail packaging
Benefits
- Control your lights from anywhere using the free My Leviton app for iOS and Android, no hub required.
- Voice Control using Amazon Alexa and Google Assistant devices (sold separately).
- Works with Nest automate lighting based on cameras, thermostats, sensors, and alarms.
- Integrate with IFTTT, utilize auto-shutoff in closets, hallways and bathrooms; plus engage home vs. away to enact randomization of lighting control.
- Simplify control of your home - schedule lights and connected loads to turn on/off at specific times or based on sunrise/sunset, easily group your smart devices into rooms, and create scenes to activate multiple lights at once.
- Designed and engineered in USA; the complete solution (hardware, app and cloud) is manufactured by Leviton
- For Indoor use only
- Brand: Enerlites
- Voltage: 120-277
- Coverage: 360°, up to 1200 sq. ft
- Controls incandescent, CFL and LED lighting
- Time delay adjustable (5 sec - 30 min)
- UL listed
- 2 year warranty
- Input Voltage120/230/277/347 VAC
- Listings UL / cUL Listed
- Load Rating 800Va @ 120VAC / 1200Va @ 277VAC
- Frequency 50/60Hz
- Mounting Height 8 - 40 Feet
- Time Delay 30 seconds - 20 minutes
- Temp Range 14 F to 160 F
- Warranty 5 Years
Clearance Item - All Sales Final
FEATURES
- White and Light Almond color faces included
- Color Change Kits (DDKIT) available in Black, Gray, Brown, Ivory
- Rated for dimmable CFL and LED loads up to 450W
- Rated for incandescent loads up to 1000W
- Rated for fluorescent ballast loads up to 1000VA
- Soft fade on/off
- On/off LED (bottom) and Brightness Level LED (left side)
- Multi-location (3-way) dimming is achieved using up to 4 remote units, DD00R-DLZ.
- Hot, neutral, load and ground required for installation and traveler for muilti-switch applications optional.
- Control up to 20 residences, 99 devices, 50 rooms, 50 scenes, 50 activities, and 50 schedules per account.
- DW1KD-1RZ is an identical product in larger retail packaging
BENEFITS
- Control your lights from anywhere using the free
- My Leviton app for iOS and Android, no hub required.
- Voice Control using Amazon Alexa and Google Assistant devices (sold separately).
- Works with Nest automate lighting based on cameras, thermostats, sensors, and alarms.
- Integrate with IFTTT, utilize auto-shutoff in closets, hallways and bathrooms; plus engage home vs. away to enact randomization of lighting control.
- Simplify control of your home schedule lights and connected loads to turn on/off at specific times or based on sunrise/sunset, easily group your smart devices into rooms, and create scenes to activate multiple lights at once.
- Designed and engineered in USA; the complete solution (hardware, app and cloud) is manufactured by Leviton
- Brand: Morris
- 5-20 Second Time Delay
- UV Stabilized Polycarbonate Cover
- High Impact Polybutylene Terephthalate Base
- IP65 Protection While Installed
- 1/2” Light Sensor
- Temp Rate: -40ºF to 158ºF
- Relative Humidity: 96%
- Power Consumption:1.5 Watts Average
- Electrical Life: 5000 Cycles
- ETL Listed
Clearance Item - All Sales Final
- Brand: WareLight Select
- Voltage: 120-277
- Coverage: 360°, up to 1900 sq. ft
- Controls incandescent, CFL and LED lighting
- Time delay adjustable (5 sec - 20 min)
- UL listed
- Warranty: 5 Year
- Brand: WareLight
- Voltage 120
- Housing: UV stabilized impact resistant Polycarbonate
- Swivel Base
- Heavy-duty thermal bi-metal switch provides a 30+ second time delay
- Contact Position at Night is Normally Closed
- Sensor Type: CDS
- Single Pole, Single Throw Switch
- Power Consumption Below 1.5 Watts Average
- Brand: WareLight Select
- Voltage: 3V
- Standby Current: 2.5uA
- Battery Life: 5 years
- (2) "AAA" Batteries Required: Not Included
- Frequency Band: 443.92Mhz
- RF Range: 30m
- Field-of-View: 120
- Detect Distance: 4m-15m
Features include:
- The Passive Infrared (PIR) Technology senses occupancy by detecting the difference between heat emitted from the human body in motion and the background space.
- PIR High/Low Bay Occupancy Sensor works best in offices, copy rooms, storage closets, small conference rooms, and other common areas where there are high levels of occupant motion.
- PIR High/Low Bay Occupancy Sensor turns lights On/Off automatically when people enter or leave a room
- Will work with Electronic, Fluorescent, Compact Fluorescent, Magnetic Low Voltage, Electronic Low Voltage and LED lighting
- Auto ON/OFF
- Coverage: 360;, 30Ft Height & 40 Ft Dia.
- Adjustable Light Level Sensitivity Settings - Ambient light setting automatically adjusts itself and controls when lights turn On/Off, depending on sufficient natural light present
- Time Delay Off setting is adjustable from 15 Seconds to 30 minutes
- Material: Polycarbonate
- 60Hz
- Single Pole
- No ground required
- Conforms to California Title 24 Energy Code
- cULus Listed
- Order Qty of 1 = 1 Piece
Clearance Item - All Sales Final
- Matching Dimmer Remote for use with Decora Digital or Decora Smart Dimmers
- Dual voltage for 120VAC and 277VAC applications
- For use in 3-way or up to 4 additional locations
- LED Locator and Brightness Display tracks main dimmer
- Digital circuitry provides soft fade on/fade off
- Neutral wire required for installation
- White face assembled on device, Ivory and Light Almond faces included
- Coordinating Switch Remote for use with Decora Digital or Decora Smart Switches
- For 120VAC applications
- For use in 3-way or up to 9 additional locations
- Neutral wire or load side required for installation
- White face assembled on device, Ivory and Light Almond faces included
- Brand: Morris
- Voltage: 208-277
- Temp Rate: -40F to 158F
- Tungsten Rating: 1800W
- Ballast Rating: 1100 VA
- Frequesncy: 50-60 Hertz
- UL listed
- Works with Amazon Alexa for voice control (hub required, Alexa device and hub sold separately)
- 300W Dimmable LED/CFL, 600W Incandescent and Fluorescent, Z-Wave Plus Certified
- 5 Year Limited Warranty
- White and Light Almond color faces included
- Color Change Kits (DDKIT) available in Black, Gray, Brown, Ivory
- Multi-Location achieved using up to 4 remote units, DD00R-DL
- Hot, neutral, load and ground required for installation and traveler for muilti-switch applications optional.
- Automatically detects excess humidity in a room and activates the ventilation fan to lessen condensation which helps reduce mold and mildew
- Sensor uses microprocessor and digital sensing technology to continuously monitor and manage humidity levels in a room
- Built-in timer sets the minimum ON time for the ventilation fan. The sensor time settings can be custom set to 10, 20, 30 or 45 minute intervals. The sensor will continue to operate the fan for the minimum time set or until there is a reduction in room humidity level
- A sensitivity level adjustment allows users to adjust the sensor s sensitivity to ambient air to prevent false cycling
- Features an Air Cycle mode which automatically turns ON the ventilation fan for a set period of time and repeats the cycle hourly (eg. 20 minutes ON/40 minutes OFF each hour)
- Replaces a single pole switch for control of ventilation fan or a fan/light combination
- Fits in a standard wall box and requires a neutral for operation
- The device s built-in humidistat control meets CALGREEN requirements for Indoor Air Quality and Exhaust.
- Can be used to comply with the requirements of 2016 California Title 24, Part 6 Indoor Air Quality and Mechanical Ventilation
- Meets the requirements of ASHRAE 62.2
- Five-Year Limited warranty
- Brand: Leviton
- Voltage: 120-347
- Fixture Mounted
- Interchangeable Adjustable 360 Lenses (Low Bay & High Bay)., Aisle Mask
- Cold Storage -40F
- UL listed
- 5 year warranty
- See spec sheet for more info
- Brand: Leviton
- Voltage: 120
- Pattern Degrees: 360
- Coverage (Sq.Ft.): 0530 Sq. Ft.
- Sensor Technology: Passive Infrared
- UL listed
- 5 year warranty
- See spec sheet for more info
Features include:
- The Passive Infrared (PIR) Technology senses occupancy by detecting the difference between heat emitted from the human body in motion and the background space.
- PIR Ceiling Sensor Switch works best in offices, copy rooms, storage closets, small conference rooms, and other common areas where there are high levels of occupant motion.
- PIR Ceiling Sensor Switch turns lights On/Off automatically when people enter or leave a room
- Will work with Electronic, Fluorescent, Compact Fluorescent, Magnetic Low Voltage, Electronic Low Voltage and LED lighting
- Auto ON/OFF
- Coverage: 360;, 30Ft Height & 40 Ft Dia.
- Adjustable Light Level Sensitivity Settings - Ambient light setting automatically adjusts itself and controls when lights turn On/Off, depending on sufficient natural light present
- Time Delay Off setting is adjustable from 15 Seconds to 30 minutes
- Material: Polycarbonate
- 60Hz
- Single Pole
- No ground required
- Conforms to California Title 24 Energy Code
- cULus Listed
- Order Qty of 1 = 1 Piece
Clearance Item - All Sales Final
- Works with Amazon Alexa for voice control (hub required, Alexa device and hub sold separately)
- 600W LED/CFL, 1800W Incandescent, Z-Wave Plus Certified
- 5 Year Limited Warranty
- White and Light Almond color faces included
- Color Change Kits (DDKIT) available in Black, Gray, Brown, Ivory
- Multi-Location achieved using DD0SR-1 (coordinating) or DD0SR-DL (matching with LED indicator)
- Hot, neutral, load and ground required for installation and traveler for muilti-switch applications optional.
- Uses industry-exclusive digital (4 element) PIR circuitry
- Auto-Adapting
- Configurable for Manual ON/Auto OFF or Auto ON/Auto OFF
- Delayed OFF Timer
- Exclusive Walk-through Feature
- False Detection Timer
- Output short circuit protection
- Industry-exclusive self-configuring local manual switch input:
- Presentation Mode feature for slide or film presentations
- Adjustable Time Delay: 30s, 5min, 10min, 20min, 30min
- Test Mode for simplified commissioning
- Industry-exclusive fail-safe circuitry
- Industry-exclusive H.I.S. (High Inrush Stability) technology
- Robust and reliable mechanically held 10A latching relay
- Lenses are easily replaceable and color-coded blue (high-density) and red (mid-range) for contractors and end-users to easily identify lenses from the ground
Clearance Item - All Sales Final
- Self-adaptive technology: no manual adjustment required
- Meets energy code requirements for ASHRAE Standard 90.1, California Title 24 and IECC, UL and cUL listed
- One relay module for single-level switching
- Field of view: 1,000 square feet and 180 of detection
- Adjustable time delays
- The OSD10 provides a maintenance free, install-and-forget operation with selectable operating modes
- Five-year limited warranty
- Works with Amazon Alexa for voice control (hub required, Alexa device and hub sold separately)
- 100W Dimmable LED/CFL, 300W Incandescent
- 5 Year Limited Warranty
- Z-Wave Plus Certified with manual on/off control
- Transient surge suppression built-in
- Small Size: Installed sensor appears almost invisible.
- Fast Simple Installation: Easy ceiling mount, three wire connection (low voltage) and twist-lock sensor attachment.
- Accurate, Consistent Switching: Occupant complaints are eliminated; lights are on when room is occupied, off when empty. annoying false-offs are minimized and lights on at night is eliminated.
- Self-Adapting: An internal microprocessor continually analyzes, evaluates and adjusts settings. Performance is kept at a maximum and user complaints are eliminated.
- Maximum Reliability, Low Cost: All digital circuitry uses a minimum of components.
- Non-Volatile Memory: Learned and adjusted settings saved in protected memory. Power outages will not cause status loss.
- 5 Year Limited warranty.
- Typical Applications: Copy Room, Open Office, Storage Room, Lounge, Non-Partitioned Restroom, Vending Room, General Work Space, or Hallway
Types of Sensors and Lighting Controls:
- Smart Automation. Giving users the ability to control lighting from their smartphone, this is one of the most versatile and useful lighting controls. These can be programmed to work with different lamp types, fixture types, and a range of locations both residential and commercial.
- Passive Infrared Ceiling Sensors. Ideal for larger locations looking to avoid wasting energy, these sensors activate lighting fixtures based on the temperature of the space changing when occupied. They can also be set to specific times to shut off the lights such as at a closing time for a business.
- Ultrasonic Ceiling Sensor. These sensors are designed for use in tight spaces where there is a limited ability to pick up on movement or infrared. Ideal for halls, storage spaces, and more, this type of device can save on energy costs in often forgotten spaces.
- High Bay Sensors. Made for use in ceilings higher than 20 feet, these allow for the fixture to either turn on or off while accommodating for this greater distance. Best of all, they will work with a range of fixture and lamp types.
- Motion Sensors. While some sensors work on heat, others detect motion as their cue to provide illumination. These are ideal for spaces both large and small looking to eliminate lighting being on when no one is in the space.
- Occupancy Sensors. Available in a variety of sizes and types to accommodate various needs, these are used to shut off lighting or turn it on based on when the room is occupied. These can be used in spaces large and small in residential, commercial, and industrial settings.
- Photo and Daylight Harvesting Sensors. These are typically used with outdoor fixtures to turn them on at night when sunlight levels drop below a certain level, and then turn them off when the sun comes up. Harvesting sensors measure ambient daylight levels, and dim or turn off lights depending on the level of light. Both are used to help conserve energy.
- Wall Control Sensors. With a wall control sensor, you can set multiple times and days to ensure lighting only operates as needed. These are ideal for business or other areas where lighting is only needed at specific times.
- Wall Switch Sensors. Ideal for use in residential and select commercial applications, this type of sensor is ideal for tight spaces. They come in a range of options to meet several needs.
With so many options for sensors and lighting controls, we make sure that you can customize this important aspect to your space. Various mounting applications are available to accommodate your specific needs, including several options that don't require twist connectors for fast installation. We also offer various programmable sensors that can be preset with a time delay or other programmed lighting designs. This helps to keep only the lights that you want on at the times when you need them. Plus, our sensors and lighting controls are durable and resistant to tampering, making it easy for you to keep control over your light solutions.
If you're looking for ways to cut down on your energy costs and make your home or business safer, get these sensors and lighting controls from Warehouse-Lighting.com today. Our selection gives you plenty of options to find the best sensor for your space. Plus, you can purchase multiple lighting controls to take advantage of our discounts on bulk orders. Contact us with any questions you have, and we'll be happy to help you find the right lighting solutions for your needs.
Frequently Asked Questions
What are Lighting Controls?
Lighting controls automatically turn lights on and off as needed and save energy. Of course, you can save energy by turning off lights when they are not needed, but sometimes we forget or don't notice that we've left them on. Lighting controls address this problem. Here are some examples of Lighting Controls:
What are the most Common Types of Lighting Controls?
- Dimmers
- Motion
- Occupancy
- Photosensors
- Timers
What are the Benefits of Using Lighting Controls?
- Lighting controls change space appearance
- Lighting controls facilitate different functions of the space
- Lighting controls can alter atmosphere and mood
- Lighting controls can reduce glare
- Lighting controls increase user satisfaction by providing users the ability to control their lighting