When you are looking for a low cost way to connect wires together we have your electrical reliable connectors. Warehouse Lighting guaranties if our connectors are used the correct way you will have no electrical problems ever. Having the right tools for the job is important to ensure every step of the project goes quickly and smoothly. This is especially true for lighting, where proper wiring can make the difference between great illumination that lasts for years and the next round of repairs.
- Brand: Wago
- Pack Qty: 100
- Rated Voltage: 450V
- Rated Impulse Voltage: 4kV
- Rated Current: 32A
- Ambient Temp (operation): 85°C
- RoHS Compliant
- Brand: Wago
- Pack Qty: 50
- Rated Voltage: 450V
- Rated Impulse Voltage: 4kV
- Rated Current: 32A
- Ambient Temp (operation): 85°C
- RoHS Compliant
- Brand: Wago
- Pack Qty: 25
- Rated Voltage: 450V
- Rated Impulse Voltage: 4kV
- Rated Current: 32A
- Ambient Temp (operation): 85°C
- RoHS Compliant
- Can handle 24-14 AWG solid/stranded wire
- Protruding levers with anti-slip design for easy use
- Larger levers for easier opening ability
- Strong lever keeps connection tight
- Multiple wire size combination fits in one connector
- 600V max rated
- 105C maximum Temp Rating
- cULus Rated
- Can handle 24-14 AWG solid/stranded wire
- Protruding levers with anti-slip design for easy use
- Larger levers for easier opening ability
- Strong lever keeps connection tight
- Multiple wire size combination fits in one connector
- 600V max rated
- 105C maximum Temp Rating
- cULus Rated
- UL Listed 600V for dry, wet or above/below grade applications when used in an enclosure
- For use in Direct Bury applications when operating at 30V or less
- Pre-filled with dielectric silicone sealant that never hardens
- Waterproof and corrosion proof
- Easy latch lid provides strain relief
- One piece for easy installation
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- Designed for tracer splices and cathodic applications
- Max. Voltage: 600V
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #6
- Silicone Sealant: -45 deg F to 400 deg F
- UL Designation: MSR
- UL 486D listed for waterproof and direct bury
- Maximum 600-Volt
- UV resistant for above ground applications
- Pre-filled with a dielectric silicone sealant that never hardens
- For use in pole lighting, high corrosion areas, traffic control loops, underpass lighting, outdoor facility lighting
- UL 486D listed, 600V rated
- Waterproof and corrosion proof
- 1 -step installation with no twisting required
- Can handle 24-14 AWG solid/stranded wire
- Protruding levers with anti-slip design for easy use
- Larger levers for easier opening ability
- Strong lever keeps connection tight
- Multiple wire size combination fits in one connector
- 600V max rated
- 105C maximum Temp Rating
- cULus Rated
- Pre-filled with a non-toxic SmartGel
- Lug style wire connector for a secure splice
- Waterproof and corrosion proof
- For use in outdoor or direct burial locations
- Making tap or branch splices on insulated cables rated up to 100 Volt
- Waterproof and corrosion proof
- SmartGel is a non-toxic formula which eliminates haz-mat requirements
- Locking mechanism centers splice in box
- UL Listed 600V for dry, wet or above/below grade applications when used in an enclosure
- For use in Direct Bury applications when operating at 30V or less
- Pre-filled with dielectric silicone sealant that never hardens
- Waterproof and corrosion proof
- Easy latch lid provides strain relief
- One piece for easy installation
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- Designed for tracer splices and cathodic applications
- Max. Voltage: 600V
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #6
- Silicone Sealant: -45 deg F to 400 deg F
- UL Designation: MSR
- UL Listed 600V for dry, wet or above/below grade applications when used in an enclosure
- For use in Direct Bury applications when operating at 30V or less
- Pre-filled with dielectric silicone sealant that never hardens
- Waterproof and corrosion proof
- Easy latch lid provides strain relief
- One piece for easy installation
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- Designed for tracer splices and cathodic applications
- Max. Voltage: 600V
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #6
- Silicone Sealant: -45 deg F to 400 deg F
- UL Designation: MSR
- UL Listed 600V for dry, wet or above/below grade applications when used in an enclosure
- For use in Direct Bury applications when operating at 30V or less
- Pre-filled with dielectric silicone sealant that never hardens
- Waterproof and corrosion proof
- Easy latch lid provides strain relief
- One piece for easy installation
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- Designed for tracer splices and cathodic applications
- Max. Voltage: 600V
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #6
- Silicone Sealant: -45 deg F to 400 deg F
- UL Designation: MSR
- UL Listed 600V for dry, wet or above/below grade applications when used in an enclosure
- For use in Direct Bury applications when operating at 30V or less
- Pre-filled with dielectric silicone sealant that never hardens
- Waterproof and corrosion proof
- Easy latch lid provides strain relief
- One piece for easy installation
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- Designed for tracer splices and cathodic applications
- Max. Voltage: 600V
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #6
- Silicone Sealant: -45 deg F to 400 deg F
- UL Designation: MSR
- For use in irrigation, landscape lighting and direct bury applications
- Waterproof and corrosion proof
- UL 486D listed, 600V rated
- 1 step installation with no pre- twisting of wires necessary
- For use in irrigation, landscape lighting and direct bury applications
- Waterproof and corrosion proof
- UL 486D listed, 600V rated
- 1 step installation with no pre- twisting of wires necessary
- For use in irrigation, landscape lighting and direct bury applications
- Waterproof and corrosion proof
- UL 486D listed, 600V rated
- 1 step installation with no pre- twisting of wires necessary
- For use in irrigation, landscape lighting and direct bury applications
- Waterproof and corrosion proof
- UL 486D listed, 600V rated
- 1 step installation with no pre- twisting of wires necessary
- UL 486D Listed for waterproof and direct bury
- Maximum 600 Volt
- UV resistant for above ground applications
- Pre-filled with a dielectric silicone sealant that never hardens
- UL Listed and 600V Rated
- Waterproof and corrosion proof
- Patented snap fit lid provides strain relief
- UV and impact resistant
- Max. Voltage: 600V max. building wire (1000V max. signs or luminaries)
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #8
- Temperature Rating: -105 deg C (221 deg F)
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- UL Designation: GT2
We have high-quality wire connectors and terminals that will help you with your next job. They are highly affordable and useful in a huge variety of applications, from residential to commercial to industrial, and they are an item you should always have on hand when dealing with wires. With our quality products, you can stay stocked up on the items you need for the job without worry.
Wire connectors are used to create tight connections between multiple electrical wires. While they provide a quality connection, they also protect the wires from contact with outside forces, including other wires, metal surfaces, and more that can cause damage or faults. This makes them a vital addition to anyone working with electrical systems, as they will help you complete a system while also ensuring no complications ever arise. Having the right lighting products for your application is important, but without the necessary wiring tools, getting the illumination you seek will be a challenge. Fortunately, we can provide the parts you need at a great price, so you will always be prepared for any problem.
Find many different options when it comes to our standard wire connectors. Various colors are available, from blue and red to orange and gray. These can help you organize your wires and keep track of which is which while also making them noticeable regardless of the background. Standard easy-twist 22-14 AWG models are easy and quick to use, allowing you to make connections in seconds whenever you need. Order bags of 500 or 1,000 to get the supply you need for any application and stay prepared for the job at hand. We have the lowest prices on high-quality wire connectors to help you find the parts you need for your next installation without spending a fortune!