Direct supplier of LED T8 2 foot direct wire and ballast compatible Lamps for use with retro fitting current fixtures. These tubes are great for energy saving over your current fluorescent T8 tubes. See the easy savings quickly with just replacing your current fluorescent lamps.
- Brand: SATCO
- Voltage: 120-277
- Wattage: 9
- Lamp Shape: T8
- Base: Medium Bi Pin G13
- Finish: White
- Length: 24 in. - Height: 1 in. - Width: 1 in.
- Average Hours: 50000
- Kelvin: 3500, 4000, 5000
- Lumens: 1100, 1150
- Color: Neutral White
- CRI: 82
- No ballast or external driver required
- Direct wire 120-277V line voltage*
- UL or ETL Listed: YES
- UL Classification: cULus Classified - Damp
- DLC Approved: Yes
- Warranty: 5 Year Limited
- Case Quantity: 25
*Existing wiring to both sockets can remain in place
*Will work on both shunted or non-shunted sockets
- Brand: Westgate Manufacturing
- Wattage: 15W
- Voltage: 120-277V
- Base: G13
- CRI: > 80
- CCT: 3000K, 3500K, 4000K or 5000K
- Life: 50,000 hours
- Lumens: 1800 LM
- Works A/C direct one end or both ends
- Works with electronic and magnetic ballasts
- Lens Option: Clear or Frosted
- Listings: UL, DLC
- 5 year warranty
PURCHASE PACK IS 12
- Brand: SATCO
- Voltage: 120-277
- Wattage: 9
- Lamp Shape: T8
- Base: Medium Bi Pin G13
- Finish: White
- Length: 24 in. - Height: 1.0 in. - Width: 1.0 in.
- Average Hours: 50000
- Kelvin: 3000
- Lumens: 1100
- Color: Warm White
- CRI: 82
- No ballast or external driver required
- UL or ETL Listed: YES
- UL Classification: cULus Classified - Damp
- DLC Approved: Yes
- DLC ID: PLQ28PR7FXG1
- Warranty: 5 Year Limited
- Case Quantity: 25
Make sure to use a direct wire tube for applications where your ballast will be removed for your fixture. Ballast compatible would be spec'd when using a fixture were the ballast is left to drive the LED 2 foot T8 lamps. Great for retrofitting your old 2 x 2 troffers and strip fixtures quickly and at a low cost. Not all tubes are compatible with all ballast please check requirements first before purchase.